The new Hilti HIT-RE 500 V3 Adhesive Anchoring System is an injectable two-component epoxy adhesive. The two components are kept separate by means of a dual-cylinder foil pack attached to a manifold. The two components combine and react when dispensed through a static mixing nozzle attached to the manifold. HIT-RE 500 V3 Adhesive Anchoring
HIT-RE 500 V3 injection mortar Anchor design (EOTA TR029 & EOTA TR045) / Rods&Sleeves / Concrete Injection mortar system Benefits Foil pack: HIT-RE 500 V3 (available in 330, 500 and 1400 ml cartridges) - SafeSet technology: Simplified method of borehole preparation using either Hilti hollow drill bit for hammer drilling or Roughening
Technical Data Sheet Hilti HIT-RE 500 V3 - studylib.net
HIT-RE 500 V3 INJECTION MORTAR Technical Datasheet Update: Jul-20 HIT-RE 500 V3 injection mortar Anchor design (EN 1992-4) / Rods&Sleeves / Concrete Injection mortar system Benefits - SafeSet technology: Simplified method of borehole preparation using either Hilti hollow drill bit for hammer drilling or Roughening Foil pack: HIT-RE 500 V3 ...
Hilti HIT-RE 500 V3 mortar with HIT-V rod Static and quasi-static resistance (for a single anchor) All data in this section applies to: - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Anchor HIT-V with strength class 5.8 and 8.8, anchor AM 8.8
- [PDF]
Hilti HIT-RE 500 V3
Product Information: Always keep this instruction for use together with the product. | Ensure that the instruction for use is with the product when it is given to other persons. | Safety Data Sheet: Review the DS before use. | Check expiration date: See expiration date imprint on foilpack manifold (month/year).
Hilti has published technical data for the Hilti HIT-RE 500 V3 adhesive anchoring system which can be used for post-installed threaded rod installations for anchor design in accordance with ACI 318 Chapter 17 and CSA A23.3 Annex D. Current published information is based on testing in accordance with ACI 355.4 and ICC-ES Acceptance Criteria for ...
For the use of Hilti HIT-RE 500 V3 with rebar for typical development calculations according to ACI 318-14 Chapter 25 (formerly ACI 318-11 Chapter 12), refer to section 3 .1 .14 for the design method and tables 83 through 87 in section 3 .2 .4 .3 .8 .
Aug 28, 2019 · Hilti HIT-RE 500 V3 adhesive anchoring system can be used for post-installed rebar and threaded rod installations for anchor design in accordance with ACI 318-14 Chapter 17 and CSA A23.3-14 Annex D. Current published information is based on testing in accordance with ACI 355.4 and ICC-ES AC308 and can be found in ESR-3814 and in section 3.2.4 o...
Hilti HIT-RE 500 V3 injection mortar may be applied in the temperature ranges given below. An elevated base material temperature may lead to a reduction of the design bond resistance.
HIT-RE 500 V3, B 1 pcs (pieces) Skin Corr. 1A, H314 Eye Dam. 1, H318 Skin Sens. 1, H317 ... Hilti Entwicklungsgesellschaft mbH Hiltistrasse 6 86916 Kaufering - Deutschland ... Not readily biodegradable in water. Biodegradability in soil: no data available. No (test)data on mobility of the substance available. (BOD) g ₂ g COD) g ₂ g 2-methyl ...
- Some results have been removed