This suite is not suitable for off-set pan connectors greater than 20 mm as this can cause the pan to syphon during flushing or may diminish the overall flushing performance.
Dec 4, 2017 · DECINA UNIVERSAL ADJUSTABLE PAN CONNECTOR 150-250MM • This universal bend with bracket is ideal for wall faced pan installations which have a required set out in excess of 150 mm. The bracket and body may be cut to the desired length. The horizontal inlet can be reduced in length - each step is 20 mm. FEATURES
Universal Adjustable Pan Connector 150-250mm - Decina Bathroomware
Adjustable universal bend with bracket; Suitable for pan installations with a required set out of over 150mm; Can be cut down to the desired set out length; Horizontal inlet can be reduced in length by 20mm steps; Suits DWV; WaterMark approval AS 2887 239
Position pan and connect with pan connector and level pan into bedding mixture, so that the back of the foot of the pan is approximately 10mm above the finished floor as detailed in Fig 3 . It is recommended that wedges are used to support the foot of the pan during the positioning.
For installation of the Uni-Orbital® connector, reference must be made to the instructions supplied with the connector. Prepare for pan fixing method (either bedding or bracket installation) as detailed below.
1 Define the position of the connector: Place the connector onto the pan, and position the connector between the outlet and waste pipe. Installation instructions are supplied with each respective pan connector.
For installation of the Uni-Orbital® connector, reference must be made to the instructions supplied with the Uni-Orbital® connector. If the set-out is greater than 220mm a packing piece will be required from the Uni-Orbital® connector fixing nut to the finished wall, as detail in Fig. 12.
This manual provides the correct steps and care advice for a safe and long lasting installation. The Adatto’s sleek, rimless back-to-wall pan sits flush against the wall. Space efficient & easy to install this model features a higher pan height, making it more comfortable for taller
Universal Bend Toilet Pan Connector | Bathrooms on a Budget
Available to suit both DWV and HDPE. Ideal for Wall Faced S Trap Pan installations with a required Set Out in excess of 180mm. Bracket and Body may be cut to required length. Horizontal inlet can be reduced in length – each step is 20mm. Universal bend toilet pan connector only.
Connect pan to connector and locate plastic fixing sleeve and brass bush into holes in the pan. Fit screw into the bracket and tighten pan to floor while ensuring level, as detailed in Step 2.