Sep 15, 2020 · The KAUDA Robotic Arm from [Giovanni Lerda] is a five-axis arm with a gripping tool and has a completely open-source set of schematics so it can be printed on any 3D printer. The robot arm...

Jul 14, 2023 · If you are building an open-source robot, then be ready to do some design mods and upgrades on things like bearing and encoders. If you want 0.1 mm at the end of the 1000 mm arm the margin of error in the angle is VERY small.

Thor is an Open Source and printable robot arm with six degrees of freedom. Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same used by most of the manipulator robots on the market. In its extended position, Thor is about 625mm high and can lift loads up to 750 grams.

MOTUS is a 6 DoF Open-Source robot arm that is almost completely 3D printed. It is controllable through software or using a remote control. In its extended position, MOTUS has a 600 mm reach and can lift loads up to 500 grams.

Holding that in mind, an Open Source robotic arm, adaptable by the students and low cost reproducible could take several educational itineraries: mechanical design, automatism, industrial programing, etc.

Thor is an Open Source and printable robot arm with six degrees of freedom. Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same used by most of the manipulator robots on the market. In its extended position, Thor is about 625mm high and can lift loads up to 750 grams.

Recently shared on Hackaday, the PyBot SCARA robotic arm is a bit different than other arms you might have seen. For one, it comes as a completely open source kit, letting anyone download the associated files and modify them if desired.

Join discord community: https://discord.com/invite/prjUvjmGpZ Faze4 is small fully 3d printable Open source 6 axis robotic arm. It is functionally and esthetically similar to robotic arms in industry but is aimed for research, education and anyone interested in making his own robot arm.

Jul 28, 2016 · Thanks to this project motivated by the Departament d’Ensenyament and developed by BCN3D Technologies, everyone will be able to fabricate their own 3D printed robot arm at home without the need for highly technical knowledge.

Aug 3, 2016 · Thor is an Open Source and printable robotic arm with six degrees of freedom. Its configuration (yaw­-roll­-roll­-yaw­-roll­-yaw) is the same one that is used on most manipulator robots that currently exist in the market.