Hilti HIT-RE 500-SD injection mortar may be applied in the temperature ranges given below. An elevated base material temperature may lead to a reduction of the design bond resistance.
The new Hilti HIT-RE 500 V3 Adhesive Anchoring System is an injectable two-component epoxy adhesive. The two components are kept separate by means of a dual-cylinder foil pack attached to a manifold. The two components combine and react when dispensed through a static mixing nozzle attached to the manifold. HIT-RE 500 V3 Adhesive Anchoring
HIT-RE 500 V4 injection mortar Rebar design (EN 1992-1-1, EOTA TR 069, EN 1998-1) / Rebar elements / Concrete Injection mortar system Benefits HIT-RE 500 V4 using either Hilti hollow drill bit for (Available in 330-, 500- and 1400-ml Foil pack) - technology: Simplified method of borehole preparation hammer drilling or Roughening tool
HIT-RE 500 V3 injection mortar Anchor design (EOTA TR029 & EOTA TR045) / Rods&Sleeves / Concrete Injection mortar system Benefits Foil pack: HIT-RE 500 V3 (available in 330, 500 and 1400 ml cartridges) - SafeSet technology: Simplified method of borehole preparation using either Hilti hollow drill bit for hammer drilling or Roughening
Hilti HIT-RE 500 V3 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) - SAFEset technology: Hilti hollow drill bit for hammer drilling and roughening tool for diamond coring - suitable for concrete C 12/15 to C 50/60 - high loading capacity - suitable for dry and water saturated concrete - for rebar diameters up to 40 mm
Mean ultimate resistance, characteristic resistance, design resistance, recommended loads.
Hilti HIT-RE 500 V3 mortar with HIT-V rod Static and quasi-static resistance (for a single anchor) All data in this section applies to: - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Anchor HIT-V with strength class 5.8 and 8.8, anchor AM 8.8
Service temperature range Hilti HIT-RE 500 V3 injection mortar may be applied in the temperature ranges given below. An elevated base material temperature may lead to a reduction of the …
Hilti HIT-RE 500 V3 injection mortar may be applied in the temperature ranges given below. An elevated base material temperature may lead to a reduction of the design bond resistance.
HIT-RE 500 with HIT-V / HAS rods Injection Mortar System Variable embedment depth Hilti HIT-RE 500 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) Benefits suitable for non-cracked concrete C 20/25 to C 50/60 high loading capacity suitable for dry and water saturated concrete under water application large diameter applications
- Some results have been removed