Problems replacing felt w/ glue - AzBilliards Forums
Nov 26, 2006 · Just tried to recover my pool table today, used 3m arisol glue. Well i strechted the cloth all across the table, glued and clamed it all done, and it looks amazing. Only problem is the glue is not holding the felt at all. I used 3m 80 which according to …
Good Staple Gun for Felting Table??? - AzBilliards Forums
May 15, 2006 · A good mechanic can cover a table bed in 20-30 minutes (of course the rails take longer)...with ANY electric staple gun. I use a cheapo 20-yr old Ace Hardware electric, and it works fine. I've seen the pro mechanics at the BCA trade show assemble a complete 9' foot table, including cloth (excepting rail cloth, which is already done beforehand ...
Removing glue from Valley slates - AzBilliards Forums
Mar 17, 2012 · I'm buying pool hall with 12 Valleys and 2 Dynamos. Tables obviously have spray glue buildup around pockets. We'll be recovering soon. In yall's experience is adhesive remover, scraping, or combination of both the best way to start with a clean...
best glue for rails - AzBilliards Forums
Dec 4, 2007 · Whoever recovered the table prior to me getting it damaged the formica on three of them putting the feather strips in. I took all of the rails to Carolina Cue (just across the lake from me) and had Matt re-cut the dadoe on the formica side and he did them perfectly on their milling machine they use for cutting cue inlays & points.
Simonis 860 glue down method | AzBilliards Forums
Jun 9, 2012 · Note for Glue-Down Installations Simonis cloth can be glued, but only with certain adhesives. Most spray adhesives, WILL NOT hold the cloth in a edge-glue application. We recommend 3M Fast-Bond10™ for edge-glue glue-down installations. Currently, we are not aware of any other adhesives that will give proper adhesion for a straight edge-glue ...
Best method to restretch/reuse pool table cloth??Help!!
May 16, 2015 · the table. This is just to keep the side pocket openings as close, length-wise, as possible. The corner pocket openings should not be a problem. The rail bolt holes (originals and new holes) will be hidden by the rails. I'm assuming there is a spot at the foot end of the table, It will probably have to be replaced so it will be in the right place.
Best way to clean the slate? | AzBilliards Forums
May 11, 2022 · Worsted cloth is supposed to be an EDGE BOND only. There should never be spray glue or any glue on top of the slate. The last guy used spray glue to install the cloth, which then mixes with the blue glue that was there originally and that makes ALL of it bad: it has to come off the sides & edges & bottoms of the slate. Not spending my time ...
Remove old glue? - AzBilliards Forums
Dec 24, 2009 · I'm moving a table with slate/wood underframe construction. However, whoever set up the table last, used adhesive instead of staples. I'm planning on stapling the cloth this time around but the question is: Should I worry about removing the old glue residue (mostly constrained to under-rail areas) and if I should, how does one go about it?
Cloth stretch, use manufacturers recommendations?
Oct 22, 2022 · Note for Glue-Down Installations Simonis cloth can be glued, but only with certain adhesives. Most spray adhesives, WILL NOT hold the cloth in a edge-glue application. We recommend 3M Fast-Bond10™ for edge-glue glue-down installations. Currently, we are not aware of any other adhesives that will give proper adhesion for a straight edge-glue ...
Felt Glue Removal from Cushion - AzBilliards Forums
Jun 14, 2010 · When we took the cushions off the rails, some of the glue and felt stuck to the wooden rail piece. What is the best way to remove this? If I use a chisel its going to take wood with it. If I keep the glue/felt remnants still on it, the rails will be off a little. I was hoping that there is a chemical that will loosen the glue. Thanks for any ...